Yıl 2016, Cilt 20 , Sayı 3, Sayfalar 597 - 603 2016-09-02

PI kontrolcü tabanlı yeni bir kontrol yapısının yükseltici DA-DA çevirici için tasarımı
Design of a new PI controller based control structure for DC-DC boost converter

Faruk Yalçın [1]


Bu çalışmada, yükseltici tip DA-DA çeviricinin kontrolü için yeni bir yaklaşım önerilmiştir. Önerilen yaklaşımda PI kontrolcü tabanlı kontrol yapısını destekleyen, çevirici giriş gerilimi ve referans çevirici çıkış gerilimine dayalı açık çevrim kontrol kuralı geliştirilmiştir. Kontrol kuralı ile yükseltici DA-DA çevirici için açık çevrim PWM (Pulse Width Modulation – Darbe Genişlik Modülasyonu) anahtarlama oranı belirlenmiştir. Kontrol kuralı, klasik PI kontrolcüyü destekleyerek, istenen çevirici çıkış geriliminin farklı sistem parametrelerinde sağlıklı ve etkili bir şekilde elde edilmesini sağlamaktadır. Önerilen yaklaşım MATLAB-Simulink ortamında simülasyon olarak test edilmiştir. Elde edilen simülasyon sonuçları, önerilen yaklaşımın farklı giriş gerilimi, referans çıkış gerilimi ve yük şartlarında yükseltici DA-DA çevirici çıkış geriliminin kaliteli bir şekilde elde edilmesini sağladığını göstermiştir.

In this paper, a new approach is proposed for control of DC-DC boost converter. In the proposed approach, open-loop control law based on the converter input voltage and the reference converter output voltage that supports the control structure based on PI controller is developed. Open loop PWM (Pulse Width Modulation) switching duty ratio is derived for the DC-DC boost converter by the control law. The control law provides to obtain the converter output voltage in a healthy and efficient manner with various system parameters through supporting the conventional PI controller. The proposed approach has been tested in MATLAB-Simulink environment as simulation. The obtained simulation results have shown that the proposed approach has provided to obtain high quality output voltage of the boost converter in different input voltage, reference output voltage and load conditions.

 
  • K. C. Wu, H. H. Wu, and C. L. Wei, “Analysis and design of mixed-mode operation for noninverting buck-boost DC-DC converters,” IEEE Trans. Circuits and Systems II-Express Briefs, vol. 62, no. 12, pp. 1194–1198, Dec. 2015.
  • V. A. K. Prabhala, P. Fajri, V. S. P. Gouribhatla, B. P. Baddipadiga, and M. Ferdowsi, “A DC-DC converter with high voltage gain and two input boost stages,” IEEE Trans. Power Electronics, vol. 31, no. 6, pp. 4206–4215, June 2016.
  • H. Zhang, M. Zhao, and X. Wu, “Zero-current switching method for dc-dc buck converter in portable application,” Electronics Letters, vol. 51, no. 23, pp. 1913–1914, Nov. 2015.
  • H. Fathabadi, “Novel high efficiency DC/DC boost converter for using in photovoltaic systems,” Solar Energy, vol. 125, pp. 22–31, Feb. 2016.
  • T. J. An, G. C. Ahn, and S. H. Lee, “High-efficiency low-noise pulse-width modulation DC-DC buck converter based on multi-partition switching for mobile system-on-a-chip applications,” IET Power Electronics, vol. 9, no. 3, pp. 559–567, Mar. 2016.
  • V. V. S. K. Bhajana and P. Drabek, “A new non-isolated ZCS bidirectional buck-boost DC-DC converter for energy storage applications in electric vehicles,” Arabian Journal for Science and Engineering, vol. 40, no. 12, pp. 3595–3605, Dec. 2015.
  • M. Hejri and H. Mokhtari, “Hybrid predictive control of a DC-DC boost converter in both continuous and discontinuous current modes of operation,” Optimal Control Applications and Methods, vol. 32, no. 3, pp. 270–284, May/June 2011.
  • C. Y. Chan, “Analysis and experimental study of an output feedback controller for a high-order boost dc-dc converter,” IET Power Electronics, vol. 6, no. 7, pp. 1279–1287, Aug. 2013.
  • H. Sira-Ramirez, “Nonlinear P-I controller design for switchmode DC-to-DC power converters,” IEEE Trans. Circuits and Systems, vol. 38, no. 4, pp. 410–417, Apr. 1991.
  • M. R. Dave and K. C. Dave, “Analysis of boost converter using PI control algorithms,” International Journal of Engineering Trends and Technology, vol. 3, no. 2, pp. 71–73, Sept. 2014.
  • S. Arulselvi, G. Uma, and M. Chidambaram, “Design of PID controller for boost converter with RHS zero,” in Proc. IPEMC, 2004, pp. 532–537.
  • A. Amirahmadi, M. Rafiei, K. Tehrani, G. Griva, and I.Batarseh, “Optimum design of integer and fractional-order PID controllers for boost converter using SPEA look-up tables,” Journal of Power Electronics, vol. 15, no. 1, pp. 160–176, Jan. 2015.
  • I. Yazici and E. K. Yaylaci, “Fast and robust voltage control of DC-DC boost converter by using fast terminal sliding mode controller,” IET Power Electronics, vol. 9, no. 1, pp. 120–125, Jan. 2016.
  • S. Singh, D. Fulwani, and V. Kumar, “Robust sliding-mode control of dc/dc boost converter feeding a constant power load,” IET Power Electronics, vol. 8, no. 7, pp. 1230–1237, July 2015.
  • I. Yazici, “Robust voltage-mode controller for DC-DC boost converter,” IET Power Electronics, vol. 8, no. 3, pp. 342–349, Mar. 2015.
  • T. J. Liang, H. H. Liang, S. M. Chen, J. F. Chen, and L. S. Yang, “Analysis, design, and implementation of a bidirectional double-boost DC–DC converter,” IEEE Trans. Industry Applications, vol. 50, no. 6, pp. 3955–3962, Nov./Dec. 2014.
  • R. Silva-Ortigoza, G. Silva-Ortigoza, V. M. Hernandez-Guzman, G. Saldana-Gonzalez, M. Marcelino-Aranda, and M. Marciano-Melcho, “Modelling, simulation and construction of a dc/dc boost power converter: a school experimental system,” European Journal of Physics, vol. 33, no. 3, pp. 647–655, May 2012.
Bölüm Araştırma Makalesi
Yazarlar

Yazar: Faruk Yalçın

Tarihler

Başvuru Tarihi : 13 Temmuz 2016
Kabul Tarihi : 17 Ekim 2019
Yayımlanma Tarihi : 2 Eylül 2016

Bibtex @ { saufenbilder270016, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {}, publisher = {Sakarya Üniversitesi}, year = {2016}, volume = {20}, pages = {597 - 603}, doi = {10.16984/saufenbilder.47764}, title = {Design of a new PI controller based control structure for DC-DC boost converter}, key = {cite}, author = {Yalçın, Faruk} }
APA Yalçın, F . (2016). Design of a new PI controller based control structure for DC-DC boost converter. Sakarya University Journal of Science , 20 (3) , 597-603 . DOI: 10.16984/saufenbilder.47764
MLA Yalçın, F . "Design of a new PI controller based control structure for DC-DC boost converter". Sakarya University Journal of Science 20 (2016 ): 597-603 <http://www.saujs.sakarya.edu.tr/tr/issue/25594/270016>
Chicago Yalçın, F . "Design of a new PI controller based control structure for DC-DC boost converter". Sakarya University Journal of Science 20 (2016 ): 597-603
RIS TY - JOUR T1 - Design of a new PI controller based control structure for DC-DC boost converter AU - Faruk Yalçın Y1 - 2016 PY - 2016 N1 - doi: 10.16984/saufenbilder.47764 DO - 10.16984/saufenbilder.47764 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 597 EP - 603 VL - 20 IS - 3 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.47764 UR - https://doi.org/10.16984/saufenbilder.47764 Y2 - 2019 ER -
EndNote %0 Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi Design of a new PI controller based control structure for DC-DC boost converter %A Faruk Yalçın %T Design of a new PI controller based control structure for DC-DC boost converter %D 2016 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 20 %N 3 %R doi: 10.16984/saufenbilder.47764 %U 10.16984/saufenbilder.47764
ISNAD Yalçın, Faruk . "Design of a new PI controller based control structure for DC-DC boost converter". Sakarya University Journal of Science 20 / 3 (Eylül 2016): 597-603 . https://doi.org/10.16984/saufenbilder.47764
AMA Yalçın F . Design of a new PI controller based control structure for DC-DC boost converter. SAUJS. 2016; 20(3): 597-603.
Vancouver Yalçın F . Design of a new PI controller based control structure for DC-DC boost converter. Sakarya University Journal of Science. 2016; 20(3): 603-597.