Yıl 2019, Cilt 23, Sayı 1, Sayfalar 113 - 120 2019-02-01

Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method

Neslihan Özsoy [1] , Murat Özsoy [2]

10 52

Surface roughness significantly affects the work efficiency and life of machine parts interacting with each other. There are many parameters that affect surface roughness such as processed material, cutting tool, cutting parameters, cooling type. For this reason, optimization of the machining parameters and proper processing conditions are very important. In this study, the optimum machining conditions were determined by investigating the surface roughness of the milled AISI 1040 steel alloy depending on the feed per tooth (0.08 mm/tooth, 0.12 mm/tooth, 0.16 mm/tooth, 0.20 mm/tooth), spindle speed (2000 rpm, 3000 rpm, 40000 rpm, 5000 rpm) and the cooling type (liquid, air) parameters. The Taguchi experimental design method was used to help achieve results at acceptable levels and to save time and cost in achieving optimal results. Experiments designed with the Taguchi method were based on the L16 orthogonal array and signal / noise (S/N) ratios were used in the evaluation of the experimental results. The optimum levels of the control factors for minimizing the surface roughness using S/N rates were determined. The optimal conditions for surface roughness were observed at A1B1C2 (i.e.,feed per tooth=0.08 mm/tooth and 2000 rpm spindle speed, cooling type=liquid). Variance analysis was also conducted in the study. According to the results of analyses, it was found that spindle speed was the most significant parameter for surface roughness. Finally, confirmation tests were conducted to check the success of the optimization.

Taguchi method, optimization, surface roughness, ANOVA
  • N. Tosun, C. Kuru, E. Altintas, O. E. Erdin, “Investigation of surface roughness in milling with air and conventional cooling method,” J. Fac. Eng. Arch. Gazi Univ. , vol. 25, pp.141-146, 2010.
  • F. Kahraman, “Optimization of cutting parameters for surface roughness in turning of studs manufactured from AISI 5140 steel using the Taguchi method,” Materails Testing, vol. 59, no. 1, pp. 77-80, 2017, DOI: 10.3139/120.110968
  • T. Kıvak, “Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts,” Measurement vol. 50, pp. 19–28, 2014, DOI: https://doi.org/10.1016/j.measurement.2013.12.017
  • M. Günay, “Optimization with Taguchi method of cutting parameters and tool nose radius in machining of AISI 316L steel,” Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 28, pp. 437-444, 2013.
  • R. Çakıroğlu, A. Acır, “Taguchi optimization method of tool chip interface temperature depending on the cutting parameters in drilling operations,” Electronic Journal of Machine Technologies, vol.10, pp. 73-86, 2013.
  • J. Z. Zhang, J. C. Chen, E. D. Kirby, “Surface roughness optimization in an end-milling operation using the Taguchi design method,” Journal of Materials Processing Technology vol. 184, pp. 233–239, 2007, DOI: 10.1016/j.jmatprotec.2006.11.029
  • K. Palanikumar, “Experimental investigation and optimization in drilling GFRP composites,” Measurement, vol. 44, pp. 2138-2148, 2011.
  • I. Asilturk, H. Akkus, “Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method,” Measurement, vol. 44, pp. 1697-1704, 2011.
  • K. R. Ranjit, “A Primer on the Taguchi Method,” Competitive Manufacturing Series, New York, 1990.
Birincil Dil en
Konular Mühendislik, Makine
Yayımlanma Tarihi February 2019
Dergi Bölümü Araştırma Makalesi
Yazarlar

Orcid: 0000-0003-1546-0205
Yazar: Neslihan Özsoy (Sorumlu Yazar)
Kurum: MÜHENDİSLİK FAKÜLTESİ
Ülke: Turkey


Orcid: 0000-0003-2400-5212
Yazar: Murat Özsoy
Kurum: SAKARYA ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder466053, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2019}, volume = {23}, pages = {113 - 120}, doi = {10.16984/saufenbilder.466053}, title = {Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method}, key = {cite}, author = {Özsoy, Neslihan and Özsoy, Murat} }
APA Özsoy, N , Özsoy, M . (2019). Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method. Sakarya University Journal of Science, 23 (1), 113-120. DOI: 10.16984/saufenbilder.466053
MLA Özsoy, N , Özsoy, M . "Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method". Sakarya University Journal of Science 23 (2019): 113-120 <http://www.saujs.sakarya.edu.tr/issue/38708/466053>
Chicago Özsoy, N , Özsoy, M . "Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method". Sakarya University Journal of Science 23 (2019): 113-120
RIS TY - JOUR T1 - Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method AU - Neslihan Özsoy , Murat Özsoy Y1 - 2019 PY - 2019 N1 - doi: 10.16984/saufenbilder.466053 DO - 10.16984/saufenbilder.466053 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 113 EP - 120 VL - 23 IS - 1 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.466053 UR - http://dx.doi.org/10.16984/saufenbilder.466053 Y2 - 2018 ER -
EndNote %0 Sakarya University Journal of Science Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method %A Neslihan Özsoy , Murat Özsoy %T Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method %D 2019 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 23 %N 1 %R doi: 10.16984/saufenbilder.466053 %U 10.16984/saufenbilder.466053
ISNAD Özsoy, Neslihan , Özsoy, Murat . "Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method". Sakarya University Journal of Science 23 / 1 (Şubat 2019): 113-120. http://dx.doi.org/10.16984/saufenbilder.466053