Yıl 2019, Cilt 23, Sayı 1, Sayfalar 85 - 93 2019-02-01

A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM

Erdoğan Kanca [1] , Volkan Cem Taşkın [2] , Ali Günen [3]

32 93

 The wire electrical discharge machining (WEDM) is widely used in the cutting of Bulk Continuous Filament (BCF) spinneret molds. Because of the low surface roughness of the spinneret molds obtained by the WEDM method, it ensures that the polypropylene material has a steady flow, volume and cross-sectional shape. Since the yarn extruded from the sections on the BCF acquire a number of physical and visual properties surface roughness of these molds have a great of importance. In this context, a new model was developed to predict the surface quality of spinneret mold sections machined using WEDM by Analysis of variance. Machining parameters such as voltage, current, pulse time and wire feed rate were used as independent input variables and surface roughness was used as dependent output parameters.  Contribution of input variables into the output variable determined by means of analysis of variance (ANOVA). Developed mathematical model estimations have been found to be in good agreement with the measured ones. The parameters with the most effect on surface roughness are listed as voltage, current, pulse, and feed, respectively.

WEDM, Surface Quality, ANOVA
  • REFERENCES [1] S. Kalpakjian, S. Schmid, ''Manufacturing, Engineering and Technology'', 5 ed., Prentice Hall, 2005.
  • [2] K.H. Ho, S.T. Newman, S. Rahimifard, R.D. Allen, ''State of the Art in Wire Electrical Discharge Machining (WEDM)'', International Journal of Machine Tools and Manufacture, vol. 44, pp. 1247-1259. DOI: 10.1016/j.ijmachtools, 2004.
  • [3] H. Abyar Firouzabadi, J. Parvizian, A. Abdullah, ''Improving Accuracy of Curved Corners in Wire EDM Successive Cutting'', Int. J. Adv Manuf. Technol, 76, 447-459. DOI: 10.1007/s00170-014-6270-0 , 2015.
  • [4] J.A. Sanchez, J.L. Rodil, A. Herrero, L.N.L. de Lacalle, A. Lamikiz, ''On the Influence of Cutting Speed Limitation on the Accuracy of Wire-EDM Corner-Cutting'', Journal of Materials Processing Technology, 182, 574-579. DOI: 10.1016/j.jmatprotec.2006.09.030, 2007.
  • [5] Z. Chen, Y. Huang, Z. Zhang, H. Li, W. Ming, G. Zhang, ''An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting'', Int. J. Adv. Manuf. Technol., 74, 917-929. DOI: 10.1007/s00170-014-6002-5, 2014.
  • [6] M. Durairaj, D. Sudharsun, N. Swamynathan, ''Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational Grade'', Procedia Engineering, 64, 868-877. DOI: 10.1016/j.proeng.2013.09.163, 2013.
  • [7] V. Aggarwal, S. Khangura, R.K. Garg, ''Parametric Modeling and Optimization for Wire Electrical Discharge Machining of Inconel 718 Using Response Surface Methodology'', Int. J. Adv. Manuf. Technol., 79, 31-47. DOI: 10.1007/s00170-015-6797-8, 2015.
  • [8] A. Ramamurthy, R. Sivaramakrishnan, T. Muthuramalingam, ''Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on Machining Titanium Alloy in WEDM Process'', Indian Journal of Engineering and Materials Sciences (IJEMS), 22, pp. 181-186, 2015.
  • [9] A. Rutherford, ''Introducing Anova and Ancova A Glm Approach'', SAGE Publications, 2001.
  • [10] D. Yip-Hoi and D. Dutta, “A genetic algorithm application for sequencing operations in process planning for parallel machining,” IIE Transactions (Institute of Industrial Engineers), vol. 28, no. 1, pp. 55–68, 1996.
Birincil Dil en
Konular Mühendislik, Makine
Yayımlanma Tarihi February 2019
Dergi Bölümü Araştırma Makalesi
Yazarlar

Yazar: Erdoğan Kanca
Kurum: Iskenderun Technical University/Mechanical Engineering Department, Hatay, Turkey
Ülke: Turkey


Yazar: Volkan Cem Taşkın
Kurum: Iskenderun Technical University/Mechanical Engineering Department, Hatay, Turkey
Ülke: Turkey


Yazar: Ali Günen (Sorumlu Yazar)
Kurum: Iskenderun Technical University/ Metallurgy and Materials Engineering Department, Hatay, Turkey
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder428457, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2019}, volume = {23}, pages = {85 - 93}, doi = {10.16984/saufenbilder.428457}, title = {A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM}, key = {cite}, author = {Taşkın, Volkan Cem and Kanca, Erdoğan and Günen, Ali} }
APA Kanca, E , Taşkın, V , Günen, A . (2019). A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. Sakarya University Journal of Science, 23 (1), 85-93. DOI: 10.16984/saufenbilder.428457
MLA Kanca, E , Taşkın, V , Günen, A . "A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM". Sakarya University Journal of Science 23 (2019): 85-93 <http://www.saujs.sakarya.edu.tr/issue/38708/428457>
Chicago Kanca, E , Taşkın, V , Günen, A . "A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM". Sakarya University Journal of Science 23 (2019): 85-93
RIS TY - JOUR T1 - A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM AU - Erdoğan Kanca , Volkan Cem Taşkın , Ali Günen Y1 - 2019 PY - 2019 N1 - doi: 10.16984/saufenbilder.428457 DO - 10.16984/saufenbilder.428457 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 85 EP - 93 VL - 23 IS - 1 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.428457 UR - http://dx.doi.org/10.16984/saufenbilder.428457 Y2 - 2018 ER -
EndNote %0 Sakarya University Journal of Science A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM %A Erdoğan Kanca , Volkan Cem Taşkın , Ali Günen %T A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM %D 2019 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 23 %N 1 %R doi: 10.16984/saufenbilder.428457 %U 10.16984/saufenbilder.428457
ISNAD Kanca, Erdoğan , Taşkın, Volkan Cem , Günen, Ali . "A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM". Sakarya University Journal of Science 23 / 1 (Şubat 2019): 85-93. http://dx.doi.org/10.16984/saufenbilder.428457