Yıl 2018, Cilt 22, Sayı 6, Sayfalar 1500 - 1507 2018-12-01

Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature

Ayça Kıyak Yıldırım [1] , Barış Altıokka [2]

130 281

In the present study, structural and physical properties of the PbS thin films produced using chemical bath deposition method were investigated. Deposition temperature was varied between 25 °C and 50 °C throughout the deposition period. The pH value of electrolyte solution and the deposition time of the films were 10.5 and 25 min, respectively. Characterizations of the PbS thin films were performed using scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. XRD results showed that all PbS thin films had a cubic structure irrespective of deposition temperature. Morphological characterizations of the films indicated that not only the number but also the size of pinholes, formed on the film surfaces, were significantly affected by the deposition temperature. Consequently, the film obtained at 25 ̊C exhibited a surface morphology with less and smaller pinholes, compared to others deposited at higher deposition temperatures.
Chemical bath deposition, Thin film, Lead nitrate, Thiourea, Pinhole
  • Referans 1 Naresh B. Kotadiya, Anjana J. Kothari,Devendra Tiwari, and Tapas K. Chaudhuri, “Photoconductingnanocrystalline lead sulphide thin films obtained by chemical bath deposition,” Applied Physics A Materials Science & Processing, vol. 108, pp. 819–824, 2000.
  • Referans 2 A.S. Obaid, M.A. Mahdi, Z. Hassan,and M. Bououdina, “PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition,” International Journal of Hydrogen Energy’' , vol. 38, pp. 807–815,2013.
  • Referans 3 A. N. Fouda, M. Marzook, H. M.AbdEl-Khalek, S. Ahmed, E. A. Eid, and A. B.El Basaty,“Structural and Optical Characterization of Chemically Deposited PbS Thin Films, ”Springer Science+Business Media Dordrecht Silicon vol. 9, pp. 809-816, 2017.
  • Referans 4 Alex P. Gaiduk, Peter I. Gaiduk, and Arne Nylandsted Larsen, “Chemical bath deposition of PbS nanocrystals: Effect of substrate,” Thin Solid Films, vol. 516 pp. 3791–3795, 2008.
  • Referans 5 H. Soetedjo, B. Siswanto, I. Azizand S. Sudjatmoko, “Low Resistivity Of Cu And Fe Doped Pbs Thin Films Prepared Using DC Sputtering Techniqueh,” Journal of Non-Oxide Glasses,vol. 9, No 2, p. 55 – 63, 2017.
  • Referans 6 E. Pentia, L. Pintilie, T. Botila, I. Pintilie,A. Chaparro, and C. Maffiotte, “Bi influence on growth and physical properties of chemical deposited PbS films,” Thin Solid Films, vol. 434, pp. 162–170, 2003.
  • Referans 7 J. P., Nair, R., Jayakrishnan, C. B. Nandu, and R. KPandley, “''In situ Sb-doped CdTe Films,” Semicond. Science and Technology, vol. 13, no. 3, pp. 340, 1998.
  • Referans 8 S. B., Park, S. W., Moon, and I. S. Woo, ''Preparation and characterization of lead zirconate titanate thin flims,'' Thin Solid Films,vol.339, pp. 77, 81,2000.
  • Referans 9 P. K., Manoj, , K. G., Gopchandran, P.,Koshy, V. K., Vaidyan, and Josephc, B., ''Growth and characterization of indium oxide thin films prepared by spray pyrolysis,'' Optical Materials,Vol. 28, No. 12, pp. 1405-1411.
  • Referans 10 M., Saleem, Fang, L., Liang,A., Wakeel, M., Rashad, ve C. Y. Kong, ''Simple preparation and characterization of nano-crystalline zinc oxide thin films by sol-gel method on glass substrate,'' World Journal of Condensed Matter Physics, No. 2, pp.10-15, 2012.
  • Referans 11 Cullity B.D., “ X-Işınlarının Difaksiyonu”, Çeviren; Sümer A., İTÜ Fizik Profesörü, İstanbul Teknik Üniversite Matbaası Gümüşsuyu, 1966.
  • Referans 12 A. Hussain, A.Begum, and A. Rahman ‘‘Characterization of Nanocrystalline Lead Sulphide Thin Films Prepared by Chemical Bath Deposition Technique’, Arabian Journal for Science and Engineering, Vol. 38 No. 1, pp.169–174, 2013.
  • Referans 13 S. Rajathi, K. Kirubavathi, and K Selvaraju ‘‘Structural, morphological, optical, and photoluminescence properties of nanocrystalline PbS thin films grown bychemical bath deposition’, Arabian Journal of Chemistry, 2015
Birincil Dil en
Konular Fizik, Uygulamalı
Yayımlanma Tarihi December 2018
Dergi Bölümü Araştırma Makalesi
Yazarlar

Orcid: 0000-0002-8339-947X
Yazar: Ayça Kıyak Yıldırım (Sorumlu Yazar)
Kurum: Bilecik Şeyh Edebali University
Ülke: Turkey


Orcid: 0000-0001-8891-973X
Yazar: Barış Altıokka
Kurum: Bilecik Şeyh Edebali University
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder409328, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2018}, volume = {22}, pages = {1500 - 1507}, doi = {10.16984/saufenbilder.409328}, title = {Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature}, key = {cite}, author = {Altıokka, Barış and Kıyak Yıldırım, Ayça} }
APA Kıyak Yıldırım, A , Altıokka, B . (2018). Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. Sakarya University Journal of Science, 22 (6), 1500-1507. DOI: 10.16984/saufenbilder.409328
MLA Kıyak Yıldırım, A , Altıokka, B . "Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature". Sakarya University Journal of Science 22 (2018): 1500-1507 <http://www.saujs.sakarya.edu.tr/issue/31266/409328>
Chicago Kıyak Yıldırım, A , Altıokka, B . "Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature". Sakarya University Journal of Science 22 (2018): 1500-1507
RIS TY - JOUR T1 - Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature AU - Ayça Kıyak Yıldırım , Barış Altıokka Y1 - 2018 PY - 2018 N1 - doi: 10.16984/saufenbilder.409328 DO - 10.16984/saufenbilder.409328 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 1500 EP - 1507 VL - 22 IS - 6 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.409328 UR - http://dx.doi.org/10.16984/saufenbilder.409328 Y2 - 2018 ER -
EndNote %0 Sakarya University Journal of Science Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature %A Ayça Kıyak Yıldırım , Barış Altıokka %T Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature %D 2018 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 22 %N 6 %R doi: 10.16984/saufenbilder.409328 %U 10.16984/saufenbilder.409328
ISNAD Kıyak Yıldırım, Ayça , Altıokka, Barış . "Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature". Sakarya University Journal of Science 22 / 6 (Aralık 2018): 1500-1507. http://dx.doi.org/10.16984/saufenbilder.409328