Yıl 2018, Cilt 22, Sayı 5, Sayfalar 1444 - 1448 2018-10-01

Optimization of Turning Process By Using Taguchi Method

Harun Akkuş [1] , Harun Yaka [2]

27 78

In this study, AISI 1040 steel is machined on CNC lathes. Taguchi L16 ortogonal array was used as experimental design. Experiments were carried out with selected the three cutting parameters. These parameters were determined as feed rate, cutting speed and cutting depth. Turning operation was carried out in dry conditions with diamond cutting tools. At the end of experiments, the values of surface roughness (Rz) on samples were found. Signal/Noise (S/N) rates were found with using the Taguchi method. According to the results, feed rate had the most significant effect on Rz among three factors. In ANOVA analysis, respectively feed rate, cutting depth and cutting speed are effective at 95% confidence level at Rz value. In repetition experiments carried out for parameters chosen in Taguchi prediction, it was identified that Taguchi works with nearly 94% accuracy.

AISI 1040, turning, Taguchi, roughness
  • 1. Özlü B., Demir H., Nas E., 2014. The mathematical modeling of parameters effecting surface roughness and cutting force during CNC turning process. Journal of Advanced Technology Sciences, 3(2), 75-86.
  • 2. Madhavi S.K., Sreeramulu D., Venkatesh M., 2017. Evaluation of optimum turning process of process parameters using DOE and PCA Taguchi method. Materials. Today: Proceedings, 4(2), 1937-1946.
  • 3. Sankar B.R., 2017. Analysis of forces during hard turning of AISI 52100 steel using Taguchi method. Materials Today: Proceedings, 4(2), 2114-2118.
  • 4. Dhar N.R., Kamruzzaman M., Ahmed M., 2006. Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of materials processing technology, 172(2), 299-304.
  • 5. Bensouilah H., Aouici H., Meddour I., Yallese M.A., Mabrouki T., Girardin F., 2016. Performance of coated and uncoated mixed ceramic tools in hard turning process”. Measurement, 82, 1-18.
  • 6. Yadav R.N., 2017. A hybrid approach of Taguchi-Response surface methodology for modeling and optimization of duplex turning process. Measurement, 100, 131-138.
  • 7. Ahmed G.S., Quadri S.S.H., Mohiuddin M.S., 2015. Optimization of feed and radial force in turning process by using Taguchi design approach. Materials Today: Proceedings, 2(4), 3277-3285.
  • 8. Asiltürk İ., Neşeli S., İnce M.A., 2016. Optimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methods. Measurement, 78, 120-128.
  • 9. Gupta M., Kumar S., 2015. Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method. Engineering Science and Technology, International Journal, 18(1), 70-81.
  • 10. Grzesik W., 2008. Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear, 265(3), 327-335.
  • 11. Özel T., Karpat Y., 2005. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks, International Journal of Machine Tools and Manufacture, 45(4), 467-479.
  • 12. Kaçal A., Yıldırım F., 2016. Determining of the optimal turning parameters using the response surface methodology in powder metallurgical tool steel. El-Cezeri Journal of Science and Engineering, 3(2), 272-280.
  • 13. Pontes F.J., Paiva A.P., Balestrassi P. P., Ferreira J.R., Silva M.B., 2012. Optimization of radial basis function neural network employed for prediction of surface roughness in hard turning process using Taguchi’s orthogonal arrays. Expert Systems with Applications, 39(9), 7776-7787.
  • 14. Ramesh S., Viswanathan R., Ambika S., 2016. Measurement and optimization of surface roughness and tool wear via grey relational analysis. TOPSIS and RSA techniques”, Measurement, 78, 63-72.
  • 15. Gürbüz H., 2015. Statistical analysis and ınvestigation of main cutting forces resulting from turning of AISI 1050 steel with coated and uncoated cutting tools in different cutting parameters. Batman University Journal of Life Sciences; Volume 5 Number 2, 147-162.
  • 16. Akıncıoğlu S., Şirin Ş., Akıncıoğlu G., Şirin E., 2016. Optımızation of surface roughness in turning of 100Cr6 bearing steel. Journal of Advanced Technology Sciences, 5(1), 46-52.
Birincil Dil en
Konular Makine Mühendisliği
Yayımlanma Tarihi October 2018
Dergi Bölümü Araştırma Makalesi
Yazarlar

Yazar: Harun Akkuş (Sorumlu Yazar)
Kurum: AMASYA ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Harun Yaka
Kurum: Amasya Üniversitesi, Amasya, Türkiye
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder409502, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2018}, volume = {22}, pages = {1444 - 1448}, doi = {10.16984/saufenbilder.409502}, title = {Optimization of Turning Process By Using Taguchi Method}, key = {cite}, author = {Yaka, Harun and Akkuş, Harun} }
APA Akkuş, H , Yaka, H . (2018). Optimization of Turning Process By Using Taguchi Method. Sakarya University Journal of Science, 22 (5), 1444-1448. DOI: 10.16984/saufenbilder.409502
MLA Akkuş, H , Yaka, H . "Optimization of Turning Process By Using Taguchi Method". Sakarya University Journal of Science 22 (2018): 1444-1448 <http://www.saujs.sakarya.edu.tr/issue/31265/409502>
Chicago Akkuş, H , Yaka, H . "Optimization of Turning Process By Using Taguchi Method". Sakarya University Journal of Science 22 (2018): 1444-1448
RIS TY - JOUR T1 - Optimization of Turning Process By Using Taguchi Method AU - Harun Akkuş , Harun Yaka Y1 - 2018 PY - 2018 N1 - doi: 10.16984/saufenbilder.409502 DO - 10.16984/saufenbilder.409502 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 1444 EP - 1448 VL - 22 IS - 5 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.409502 UR - http://dx.doi.org/10.16984/saufenbilder.409502 Y2 - 2018 ER -
EndNote %0 Sakarya University Journal of Science Optimization of Turning Process By Using Taguchi Method %A Harun Akkuş , Harun Yaka %T Optimization of Turning Process By Using Taguchi Method %D 2018 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 22 %N 5 %R doi: 10.16984/saufenbilder.409502 %U 10.16984/saufenbilder.409502
ISNAD Akkuş, Harun , Yaka, Harun . "Optimization of Turning Process By Using Taguchi Method". Sakarya University Journal of Science 22 / 5 (Ekim 2018): 1444-1448. http://dx.doi.org/10.16984/saufenbilder.409502