Yıl 2018, Cilt 22, Sayı 5, Sayfalar 1477 - 1481 2018-10-01

Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings

Kudret Güzel [1] , Ekrem Altuncu [2] , Sinan Fidan [3]

30 55

Flame spray technology is basic member of the thermal spray coating family. Higher cost-effective coatings can be produced at higher speeds with new flame spray equipments which developed in recent years. The Flexicord flame spray method developed in this direction offers many advantages. A wide variety of ceramic coatings can be deposited on metallic surfaces with this spray methods in the face of wear-induced problems. In this study, solid particle erosion rates and wear behaviors of different oxide (Al2O3, MgO-Zr2O3, Al2O3-MgO based coatings have been studied comparatively with respect to ASTM G76 standard. Spinel based coatings between the oxide based coatings exhibited superior wear resistance and significantly lower mass loss than the others. Due to the fragile nature of the ceramic coatings, the erosive wear rate is increased by crack growth formation related with the porosity of coating. Due to the accelerated solid particle impacting at high impact angles, wear rate is highest.

Thermal spray, Flame spraying, Solid particle erosion, Microcracks.
  • 1 .Cernuschi, F., Guardamagna, C., Capelli, S., Lorenzoni, L., Mack, D.E., Moscatelli, A., Solid particle erosion of standard and advanced thermal barrier coatings, 348-349, 43–51, 2016.
  • 2. Clarke DR., Oechsner M., Padture NP. Thermal-barrier coatings for more efficient gas-turbine engines, 37,891–8, 2012.
  • 3. Evans AG., Mumm DR., Hutchinson JW., Meier GH., Pettit FS., Mechanisms controlling the durability of thermal barrier coatings, Prog Mater Sci, 46, 505–53, 2001.
  • 4. Pawlowski, L., Wiley, J., The Science and Engineering of Thermal Spray Coatings, New York, 1995.
  • 5. Fauchais, P., Phys, J., Understanding plasma spraying, 86–108, 2004
  • 6. Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray A Tutorial Review Mingheng Li and Panagiotis D. Christofides; Journal of Thermal Spray Technology, 753-768, 2009.
  • 7. Lima, R.S., Moreau, C., Marple, B.R., HVOF-Sprayed Coatings Engineered from Mixtures of Nanostructured and Submicron Al2O3-TiO2 Powders, An Enhanced Wear Performance, J. Therm. Spray Technol., 866-872, 2007.
  • 8. ASTM G76-13, Standard test method for conducting erosion test by solıd particle ımpingement using gas jet, 2013.
Birincil Dil en
Konular Malzeme Bilimi
Yayımlanma Tarihi October 2018
Dergi Bölümü Araştırma Makalesi
Yazarlar

Orcid: 0000-0001-5623-7216
Yazar: Kudret Güzel (Sorumlu Yazar)
Ülke: Turkey


Orcid: 0000-0002-1395-9013
Yazar: Ekrem Altuncu (Sorumlu Yazar)
Ülke: Turkey


Orcid: 0000-0003-4385-4981
Yazar: Sinan Fidan (Sorumlu Yazar)
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder408198, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2018}, volume = {22}, pages = {1477 - 1481}, doi = {10.16984/saufenbilder.408198}, title = {Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings}, key = {cite}, author = {Fidan, Sinan and Güzel, Kudret and Altuncu, Ekrem} }
APA Güzel, K , Altuncu, E , Fidan, S . (2018). Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings. Sakarya University Journal of Science, 22 (5), 1477-1481. DOI: 10.16984/saufenbilder.408198
MLA Güzel, K , Altuncu, E , Fidan, S . "Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings". Sakarya University Journal of Science 22 (2018): 1477-1481 <http://www.saujs.sakarya.edu.tr/issue/31265/408198>
Chicago Güzel, K , Altuncu, E , Fidan, S . "Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings". Sakarya University Journal of Science 22 (2018): 1477-1481
RIS TY - JOUR T1 - Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings AU - Kudret Güzel , Ekrem Altuncu , Sinan Fidan Y1 - 2018 PY - 2018 N1 - doi: 10.16984/saufenbilder.408198 DO - 10.16984/saufenbilder.408198 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 1477 EP - 1481 VL - 22 IS - 5 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.408198 UR - http://dx.doi.org/10.16984/saufenbilder.408198 Y2 - 2018 ER -
EndNote %0 Sakarya University Journal of Science Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings %A Kudret Güzel , Ekrem Altuncu , Sinan Fidan %T Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings %D 2018 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 22 %N 5 %R doi: 10.16984/saufenbilder.408198 %U 10.16984/saufenbilder.408198
ISNAD Güzel, Kudret , Altuncu, Ekrem , Fidan, Sinan . "Comparison of Solid Particle Erosive Wear Rate At Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings". Sakarya University Journal of Science 22 / 5 (Ekim 2018): 1477-1481. http://dx.doi.org/10.16984/saufenbilder.408198