Yıl 2018, Cilt 22, Sayı 5, Sayfalar 1181 - 1189 2018-10-01

Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment

Nagihan Sezgin [1] , Erkan Kaçar [2] , Kürşat Kazmanlı [3] , Mustafa Ürgen [4]

200 351

In this study, cathodic arc electron / metal ion treatment (CA-EMIT) technique was used to modify Ti surfaces in Ni cathodic arc plasma. At this novel method, AC bias was applied to the Ti substrates. In positive cycle of AC bias, the substrates were heated by electrons while nickel ions were directed toward the substrate surface in negative cycle. The surface modification processes were performed at 5 different temperatures: 1073 K (800 °C), 1273 K (1000 °C), 1373 K (1100 °C), 1473 K (1200 °C) and 1573 (1300 °C). The samples were characterized by XRD, SEM and EDS analysis. The effect of substrate temperature and cathode current were investigated on microstructure of the samples. This process provides rapid diffusion of nickel into the titanium and high diffusion depths were obtained compared to literature studies.


Ni-Ti diffusion, Intermetallics, Cathodic Arc PVD, Plasma treatment
  • [1] G. F. Bastin and G. D. Rieck, Diffusion in the Titanium-Nickel System: I. Occurrence and Growth of the Various Intermetallic Compounds, Metall. Trans., 1974, vol. 5, pp. 1817-26.
  • [2] G. F. Bastin and G. D. Rieck, Diffusion in the Titanium-Nickel System: II. Calculations of Chemical and Intrinsic Diffusion Coefficients, Metall.Trans, 1974, vol. 5, pp. 1827-31.
  • [3] J.E. Garay, U. Anselmi-Tamburini 1, Z.A. Munir, Enhanced growth of intermetallic phases in the Ni–Ti system by current effects, Acta Mater., 2003, vol. 51, pp. 4487-95.
  • [4] J. Laeng, Z. Xiu, X. Xu, X. Sun, H. Ru and Y. Liu, Phase formation of Ni–Ti via solid state reaction, Phys. Scr., 2007, vol. T129, pp. 250–254.
  • [5] X. Shao, X. Guo, Y. Han, Z. Lin, J. Qin, W. Lu and D. Zhang, Preparation of TiNi films by diffusion technology and the study of the formation sequence of the intermetallics in Ti–Ni systems, J. Mater. Res., 2014, vol. 29, pp. 2707-16.
  • [6] X. Shao, X. Guo, Y. Han, W. Lu, J. Qin, D. Zhang, Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing, Mater. Des., 2015, vol. 65, pp. 1001–10.
  • [7] P. Novák, L. Mejzlíková, A. Michalcová, J. Capek, P. Beran, D. Vojtech, Effect of SHS conditions on microstructure of NiTi shape memory alloy, Intermetallics, 2013, vol. 42, pp. 85-91.
  • [8] P. Novák, P.Pokorný, V. Vojtech, A. Knaislova, A. Skolakova, J. Capek, M. Karlík, J. Kopecek, Formation of Ni-Ti intermetallics during reactive sintering at 500-650 °C, Mater. Chem. Phys., 2015, vol. 155, pp. 113-121.
  • [9] A. Elrefaey, L. Wojarski, J. Janzcak-Rusch and W. Tillmann, Vacuum brazing titanium using thin nickel layer deposited by PVD technique, Mater. Sci. Eng. A, 2013, vol. 565, pp. 180-186.
  • [10] I. Rampin, K. Brunelli, M. Dabalà, M. Magrini, Effect of diffusion of Ni and B on the microstructure and hardness of Ti Cp, J. Alloys Compd., 2009, vol. 48, pp. 1246–53.
  • [11] D.Y. Li, A new type of wear-resistant material: pseudo-elastic TiNi alloy, Wear, 1998, vol. 22, pp. 1116–23.
  • [12] H.Hiraga, T. Inoue, H. Shimura, A. Matsunawa, Cavitation erosion mechanism of NiTi coatings made by laser plasma hybrid spraying, Wear, 1999, vol. 231, pp. 272-278.
  • [13] F. Gao and H.M. Wang, Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy, Intermetallics, 2008, vol. 16, pp. 202-208.
  • [14] Murray J. L., ASM Handbook vol. 3: Alloy Phase Diagrams, ASM International, USA, 1992, pp. 319.
  • [15] S. Oncel, Production of NiAl thermal barrier bond coats by cathodic arc aluminium plasma treatment, Doctoral Dissertation, Istanbul Technical University, Institute of Science and Technology, Turkey, 2012.
  • [16] S. Oncel and M. Urgen, Method for controlled production of diffusion based coatings by vacuum cathodic arc systems, Patent, EP 2829635 A1, Jan 28, 2015.
  • [17] J. L. Vossen and W. Kern, Thin Film Processes II, Gulf Publishing, San Diego-CA, 1991, pp. 210-218.
  • [18] S. M. Rossnagel, J. J. Cuomo, W. D. Westwood, Handbook of plasma processing technology, Noyes Publication, New Jersey, 1990, pp. 419-430.
  • [19] J. Vetter and A. J. Perry, Advances in cathodic arc technology using electrons extracted from the vacuum arc, Surf. Coat. Technol., 1993, vol. 61, pp. 305-309.
  • [20] T. Turutoglu, Alloying of titanium surfaces by cathodic arc aluminum plasma, Doctoral Dissertation, Istanbul Technical University, Institute of Science and Technology, Turkey, 2013.
  • [21] V.I. Nizhenko, Free surface energy as a criterion for the sequence of intermetallic layer formation in reaction couples, Powder Metall. Met. Ceram., 2004, vol. 43, pp. 273-279.
  • [22] S. Kundu and S. Chatterjee, Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer, Mater. Charact., 2008, vol. 59, pp. 631-637.
  • [23] J.M. Sosa, D.E. Huber, B. Welk, H.L. Fraser, Development and application of MIPARTM: a novel software package for two- and three-dimensional microstructural characterization, Integr. Mater. Manuf. Innov., 2014, vol.3, pp. 18
Birincil Dil en
Konular Malzeme Bilimi
Yayımlanma Tarihi October 2018
Dergi Bölümü Araştırma Makalesi
Yazarlar

Yazar: Nagihan Sezgin
Kurum: İSTANBUL TEKNİK ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Erkan Kaçar
Kurum: İSTANBUL TEKNİK ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Kürşat Kazmanlı
Kurum: İSTANBUL TEKNİK ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Mustafa Ürgen
Kurum: İSTANBUL TEKNİK ÜNİVERSİTESİ
Ülke: Turkey


Bibtex @araştırma makalesi { saufenbilder315032, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {Sakarya Üniversitesi}, year = {2018}, volume = {22}, pages = {1181 - 1189}, doi = {10.16984/saufenbilder.315032}, title = {Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment}, key = {cite}, author = {Sezgin, Nagihan and Ürgen, Mustafa and Kazmanlı, Kürşat and Kaçar, Erkan} }
APA Sezgin, N , Kaçar, E , Kazmanlı, K , Ürgen, M . (2018). Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment. Sakarya University Journal of Science, 22 (5), 1181-1189. DOI: 10.16984/saufenbilder.315032
MLA Sezgin, N , Kaçar, E , Kazmanlı, K , Ürgen, M . "Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment". Sakarya University Journal of Science 22 (2018): 1181-1189 <http://www.saujs.sakarya.edu.tr/issue/31265/315032>
Chicago Sezgin, N , Kaçar, E , Kazmanlı, K , Ürgen, M . "Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment". Sakarya University Journal of Science 22 (2018): 1181-1189
RIS TY - JOUR T1 - Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment AU - Nagihan Sezgin , Erkan Kaçar , Kürşat Kazmanlı , Mustafa Ürgen Y1 - 2018 PY - 2018 N1 - doi: 10.16984/saufenbilder.315032 DO - 10.16984/saufenbilder.315032 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 1181 EP - 1189 VL - 22 IS - 5 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.315032 UR - http://dx.doi.org/10.16984/saufenbilder.315032 Y2 - 2017 ER -
EndNote %0 Sakarya University Journal of Science Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment %A Nagihan Sezgin , Erkan Kaçar , Kürşat Kazmanlı , Mustafa Ürgen %T Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment %D 2018 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 22 %N 5 %R doi: 10.16984/saufenbilder.315032 %U 10.16984/saufenbilder.315032
ISNAD Sezgin, Nagihan , Kaçar, Erkan , Kazmanlı, Kürşat , Ürgen, Mustafa . "Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment". Sakarya University Journal of Science 22 / 5 (Ekim 2018): 1181-1189. http://dx.doi.org/10.16984/saufenbilder.315032