Year 2019, Volume 23 , Issue 4, Pages 569 - 582 2019-08-01

Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material

Ersen Balcıoğlu [1] , Raif Sakin [2]


In the recent year, with the development of technology the acceleration of the manufacturing of new products has increased the use of raw materials in the industry. In addition to decreasing underground resources, increased environmental pollution has opened the way for the use of natural materials in the industry. Also, the reuse of materials, which were recycled by recovery methods, is both conservation and economical method in terms of raw material deficiency. In this study, mechanical properties of sandwich composites made of natural and recycled material were investigated. In this context, core material with different thicknesses (4 mm, 8 mm and 12 mm) were produced using different size granules (1 mm, 2 mm and 4 mm), which were recycled from the used vehicle tire. Sandwich composite materials have become final with the combination of core materials with natural jute fabric reinforced laminated composites. In order to test the usability of the produced sandwich composite materials as building material, the mechanical behaviours of the sandwich composite were investigated under tension and compression load. Test results show that mechanical behaviour of the material varies according to the granular size, thickness of the core material, and fiber orientation of reinforcement fabric.

sandwich composites, mechanical properties, recycling, natural fiber, granule size, core thicknes
  • [1] C. Elanchezhian, B. V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar, and M. K. Saravanakumar, “Review on mechanical properties of natural fiber composites.,” Mater. Today Proc., vol. 5, no. 1, pp. 1785–1790, 2018.
  • [2] M. Rajesh and T. Kanish, “Mechanical Properties of Natural Fiber Sandwich Composite: Effect of Core Layer,” Mech. Mater. Sci. Eng. MMSE J. Open Access, vol. 9, pp. 1–5, 2017.
  • [3] M. Karahan, H. Gul, N. Karahan, and J. Ivens, “Static behavior of three-dimensional ıntegrated core sandwich composites subjected to three-point bending,” J. Reinf. Plast. Compos., vol. 32, no. 9, pp. 664–678, May 2013.
  • [4] H. E. Balcıoğlu, “FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL,” Mugla J. Sci. Technol., pp. 64–73, Jun. 2018.
  • [5] B. Wang, L. Wu, X. Jin, S. Du, Y. Sun, and L. Ma, “Experimental investigation of 3D sandwich structure with core reinforced by composite columns,” Mater. Des., vol. 31, no. 1, pp. 158–165, Jan. 2010.
  • [6] Y. C. Shiah, L. Tseng, J. C. Hsu, and J. H. Huang, “Experimental Characterization of an Integrated Sandwich Composite Using 3D Woven Fabrics as the Core Material,” J. Thermoplast. Compos. Mater., vol. 17, no. 3, pp. 229–243, May 2004.
  • [7] L. J. Lee, K. Y. Huang, and Y. J. Fann, “Dynamic Responses of Composite Sandwich Plate Impacted by a Rigid Ball*,” J. Compos. Mater., vol. 27, no. 13, pp. 1238–1256, Dec. 1993.
  • [8] A. W. Van Vuure, J. A. Ivens, and I. Verpoest, “Mechanical properties of composite panels based on woven sandwich-fabric preforms,” Compos. Part Appl. Sci. Manuf., vol. 31, no. 7, pp. 671–680, 2000.
  • [9] S. . Joshi, L. . Drzal, A. . Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?,” Compos. Part Appl. Sci. Manuf., vol. 35, no. 3, pp. 371–376, Mar. 2004.
  • [10] R. D. S. G. Campilho, D. C. Moura, D. J. S. Gonçalves, J. F. M. G. da Silva, M. D. Banea, and L. F. M. da Silva, “Fracture toughness determination of adhesive and co-cured joints in natural fibre composites,” Compos. Part B Eng., vol. 50, pp. 120–126, Jul. 2013.
  • [11] Z. Salleh, Y. M. Taib, K. M. Hyie, M. Mihat, M. N. Berhan, and M. A. A. Ghani, “Fracture Toughness Investigation on Long Kenaf/Woven Glass Hybrid Composite Due To Water Absorption Effect,” Procedia Eng., vol. 41, pp. 1667–1673, 2012.
  • [12] K. J. Wong, S. Zahi, K. O. Low, and C. C. Lim, “Fracture characterisation of short bamboo fibre reinforced polyester composites,” Mater. Des., vol. 31, no. 9, pp. 4147–4154, Oct. 2010.
  • [13] X. Y. Liu and G. C. Dai, “Surface modification and micromechanical properties of jute fiber mat reinforced polypropylene composites,” Express Polym. Lett., vol. 1, no. 5, pp. 299–307, 2007.
  • [14] A. V. Rajulu et al., “Mechanical Properties of Short, Natural Fiber Hildegardia populifolia-reinforced Styrenated Polyester Composites,” J. Reinf. Plast. Compos., vol. 24, no. 4, pp. 423–428, Mar. 2005.
  • [15] S. N. Monteiro, L. A. H. Terrones, and J. R. M. D’Almeida, “Mechanical performance of coir fiber/polyester composites,” Polym. Test., vol. 27, no. 5, pp. 591–595, Aug. 2008.
  • [16] M. Jawaid, H. P. S. Abdul Khalil, A. Hassan, R. Dungani, and A. Hadiyane, “Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites,” Compos. Part B Eng., vol. 45, no. 1, pp. 619–624, Feb. 2013.
  • [17] F. Sarasini, J. Tirillò, C. Sergi, M. C. Seghini, L. Cozzarini, and N. Graupner, “Effect of basalt fibre hybridisation and sizing removal on mechanical and thermal properties of hemp fibre reinforced HDPE composites,” Compos. Struct., vol. 188, pp. 394–406, Mar. 2018.
  • [18] N. Lu and S. Oza, “A comparative study of the mechanical properties of hemp fiber with virgin and recycled high density polyethylene matrix,” Compos. Part B Eng., vol. 45, no. 1, pp. 1651–1656, Feb. 2013.
Primary Language en
Subjects Engineering, Mechanical
Published Date August 2019
Journal Section Research Articles
Authors

Orcid: 0000-0002-8579-5142
Author: Ersen Balcıoğlu (Primary Author)
Institution: MÜHENDİSLİK FAKÜLTESİ
Country: Turkey


Orcid: 0000-0001-6009-9573
Author: Raif Sakin

Dates

Application Date : November 23, 2018
Acceptance Date : January 22, 2019
Publication Date : August 1, 2019

Bibtex @research article { saufenbilder486846, journal = {Sakarya University Journal of Science}, issn = {1301-4048}, eissn = {2147-835X}, address = {}, publisher = {Sakarya University}, year = {2019}, volume = {23}, pages = {569 - 582}, doi = {10.16984/saufenbilder.486846}, title = {Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material}, key = {cite}, author = {Balcıoğlu, Ersen and Sakin, Raif} }
APA Balcıoğlu, E , Sakin, R . (2019). Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material. Sakarya University Journal of Science , 23 (4) , 569-582 . DOI: 10.16984/saufenbilder.486846
MLA Balcıoğlu, E , Sakin, R . "Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material". Sakarya University Journal of Science 23 (2019 ): 569-582 <http://www.saujs.sakarya.edu.tr/en/issue/43328/486846>
Chicago Balcıoğlu, E , Sakin, R . "Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material". Sakarya University Journal of Science 23 (2019 ): 569-582
RIS TY - JOUR T1 - Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material AU - Ersen Balcıoğlu , Raif Sakin Y1 - 2019 PY - 2019 N1 - doi: 10.16984/saufenbilder.486846 DO - 10.16984/saufenbilder.486846 T2 - Sakarya University Journal of Science JF - Journal JO - JOR SP - 569 EP - 582 VL - 23 IS - 4 SN - 1301-4048-2147-835X M3 - doi: 10.16984/saufenbilder.486846 UR - https://doi.org/10.16984/saufenbilder.486846 Y2 - 2019 ER -
EndNote %0 Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material %A Ersen Balcıoğlu , Raif Sakin %T Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material %D 2019 %J Sakarya University Journal of Science %P 1301-4048-2147-835X %V 23 %N 4 %R doi: 10.16984/saufenbilder.486846 %U 10.16984/saufenbilder.486846
ISNAD Balcıoğlu, Ersen , Sakin, Raif . "Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material". Sakarya University Journal of Science 23 / 4 (August 2019): 569-582 . https://doi.org/10.16984/saufenbilder.486846
AMA Balcıoğlu E , Sakin R . Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material. SAUJS. 2019; 23(4): 569-582.
Vancouver Balcıoğlu E , Sakin R . Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material. Sakarya University Journal of Science. 2019; 23(4): 582-569.